Physics + QISE Key Concepts

Home » Teaching and Learning Resources » QISE K-12 Framework » Physics + QISE Key Concepts

Quantum information science leverages quantum mechanics to develop new capabilities in computing, sensing, and communications. In many physics classes, there may be natural points of integration around topics such as modern physics, electricity and magnetism, properties of light, and circuits. The purpose of the QISE K-12 Key Concepts Physics Focus Group was to create an initial set of expectations and learning goals, which will be useful to curriculum developers and teachers seeking to develop physics lessons and activities for teaching QISE K-12 Key Concepts.

The output from this group was a series of expectations and outcomes for each QISE Key Concept, shown below. A full PDF of the framework is also available that contains cross-cutting themes (pg. 28) and identified tie-ins to current NGSS standards (pg. 32). This initial framework is intended to evolve over time as quantum education for K-12 develops.

This is version 2, based feedback from the community. Please reach out to us with your comments/questions at emily.edwards@duke.edu.

Explore the QISE K-12 Key Concepts - Physics Framework

Quantum Information Science

Quantum information science (QIS) exploits quantum principles to transform how information is acquired, encoded, manipulated, and applied. Quantum information science encompasses quantum computing, quantum communication, and quantum sensing, and spurs other advances in science and technology.

  1. Quantum information science employs quantum mechanics, a well-tested theory that uses the mathematics of probability, vectors, algebra, trigonometry, complex numbers, and linear transformations to describe the physical world.
  2. Quantum information science combines information theory and computer science, following the laws of quantum mechanics, to process information in fundamentally new ways.
  3. Quantum information science has already produced and enhanced high impact technologies such as the Global Positioning System (GPS), which depends on the extreme precision of atomic clocks. based on the quantum states of atoms.

Note: The definition of QIS could be discussed as a precursor to any of the other concepts, or in discussions of career opportunities in the field.

Quantum State

A quantum state is a mathematical representation of a physical system, such as an atom, and provides the basis for processing quantum information.

  1. Quantum states are represented by directions or vectors in an abstract space.
  2. The direction of the quantum state vector determines the probabilities of all of the possible outcomes of a set of measurements. Quantum manipulations in the physical world follow vector operations, incorporating complex numbers and negative values. This captures a behavior of physical quantum systems that cannot be described solely by the arithmetic of probability.
  3. Quantum systems are fragile. For instance, measurement almost always disturbs a quantum system in a way that cannot be ignored. This fragility influences the design of computational algorithms and communication and sensing protocols.

Description: A quantum state defines the properties of a quantum system, such as an electron bound to an atom. It can be represented by parameters such as quantum numbers, and contains the information needed to predict the outcomes of experiments.

Expectation: Students will be able to identify quantum systems and their allowed states, which can exist as superpositions of mutually exclusive or (perfectly) distinguishable states.

HS.Phys.2.1
Learning Outcome: Students will be able to identify physical systems that are described by quantum mechanics (referred to as “quantum systems”). Examples:
  1. To predict the behavior of fundamental particles, such as electrons, as well as atoms and molecules, we require a mathematical description beyond classical mechanics.
  2. Electromagnetic radiation consists of indivisible units, or quanta, of energy called photons.
  3. Light interacts with atoms in a way that cannot be fully described by classical physics (e.g., the photoelectric effect, atomic spectra). Quantum mechanics is a better theory to explain these interactions
Standards Alignment (NGSS):
  • HS-PS4-3 – Evaluate the claims, evidence, and reasoning behind the idea that electromagnetic radiation can be described either by a wave model or a particle model, and that for some situations one model is more useful than the other.
  • HS-PS4-4 – Evaluate the validity and reliability of claims in published materials of the effects that different frequencies of electromagnetic radiation have when absorbed by matter.
HS.Phys.2.2
Learning Outcome: Students will describe that many properties of quantum systems are quantized, meaning that they are restricted to discrete values, and explain experimental evidence for quantization. Examples:
  1. The photoelectric effect demonstrates that electromagnetic radiation consists of indivisible units, or quanta, of energy called photons.
  2. In an atom, the energy levels of its electrons are quantized, as demonstrated in spectroscopy experiments.
  3. The spin magnetic moment of an electron is either up or down, as demonstrated by the Stern-Gerlach experiment.
Standards Alignment (NGSS):
  • HS-PS4-3 – Evaluate the claims, evidence, and reasoning behind the idea that electromagnetic radiation can be described either by a wave model or a particle model, and that for some situations one model is more useful than the other.
  • HS-PS4-4 – Evaluate the validity and reliability of claims in published materials of the effects that different frequencies of electromagnetic radiation have when absorbed by matter.
HS.Phys.2.3
Learning Outcome: Students will identify that quantum systems have states that are mutually exclusive from each other. Examples:
  1. A photon’s polarization has pairs of mutually-exclusive states, such as horizontal and vertical.
  2. An electron’s spin has pairs of mutually-exclusive states, such as spin-up and spin-down.
  3. An atom has an infinite number of mutually-exclusive states with different energies (commonly called energy levels).
Standards Alignment (NGSS):
  • HS-PS1-1 – Use the periodic table as a model to predict the relative properties of elements based on the patterns of electrons in the outermost energy level of atoms.
  • HS-PS4-5 – Communicate technical information about how some technological devices use the principles of wave behavior and wave interactions with matter to transmit and capture information and energy.
HS.Phys.2.4
Learning Outcome: Students will explain that quantum states can be expressed as superpositions of multiple distinguishable states. Students will connect the idea of superposition to vectors that are expressed as combinations of basis vectors. Examples:
  1. A photon’s polarization state can be expressed in terms of horizontal and vertical components, or in any other (orthogonal) basis consisting of two perpendicular polarizations.
  2. An electron bound to an atom can be in a superposition of different energy states.
  3. A particle, such as an electron, passing through two slits in a double-slit experiment results in interference. The distinguishable quantum states correspond to the particle passing through one slit or the other. Interference arises when the quantum state of the particle has components corresponding to both.
Note: Honors/AP Extensions related to HS.Phys.2.4 Learning Outcome
  • HS.Phys.2.4AP1
  • HS.Phys.2.4AP2
  • HS.Phys.2.4AP3
Standards Alignment (NGSS):
  • HS-PS4-3 – Evaluate the claims, evidence, and reasoning behind the idea that electromagnetic radiation can be described either by a wave model or a particle model, and that for some situations one model is more useful than the other.
HS.Phys.2.4AP1

Learning Outcome:
Students will explain that quantum states can be expressed as superpositions of multiple distinguishable states. Students will connect the idea of superposition to vectors that are expressed as combinations of basis vectors.
Honors/AP Extension: Students will be able to represent quantum states in an abstract space as column vectors with complex entries (probability amplitudes) in a given basis.

Examples:

  1. A photon with horizontal polarization can be represented by a column vector \(\begin{bmatrix}1\\0\end{bmatrix} \), and a vertical polarization can be represented by a column vector \(\begin{bmatrix}0\\1\end{bmatrix} \). Then, a 45° polarization can be represented by a column vector \(\begin{bmatrix}\frac{1} {\sqrt{2}}\\\frac{1}{\sqrt{2}}\end{bmatrix} \) and
    a -45° polarization can be represented by a column vector \(\begin{bmatrix}\frac{1} {\sqrt{2}}\\ \frac{-1}{\sqrt{2}}\end{bmatrix} \).
  2. A spin-up electron can be represented by a column vector \(\begin{bmatrix}1\\0\end{bmatrix} \), and a spin-down electron can be represented by
    the column vector \(\begin{bmatrix}0\\1\end{bmatrix} \). Then, a spin-left electron can be represented by a column vector \(\begin{bmatrix}\frac{1} {\sqrt{2}}\\\frac{1}{\sqrt{2}}\end{bmatrix} \), and a spin-right
    electron can be represented by a column vector \(\begin{bmatrix}\frac{1} {\sqrt{2}}\\ \frac{-1}{\sqrt{2}}\end{bmatrix} \).

    Standards Alignment (NGSS):

    • HS-PS4-4 – Evaluate the validity and reliability of claims in published materials of the effects that different frequencies of electromagnetic radiation have when absorbed by matter.
    HS.Phys.2.4AP2
    Learning Outcome: Students will explain that quantum states can be expressed as superpositions of multiple distinguishable states. Students will connect the idea of superposition to vectors that are expressed as combinations of basis vectors. Honors/AP Extension: Students will be able to write quantum states in Dirac notation, including specific examples such as polarization states and spin states. Examples:
    1. In Dirac notation, a photon with horizontal polarization can be represented by the ket |H›, and a photon with vertical polarization can be represented by the ket |V›. Then, a 45° (diagonal) polarization can be written as (1/√2) |H› + (1/√2) |V›, and a -45° (anti-diagonal) polarization can be written as (1/√2) |H› – (1/√2) |V›.
    2. In Dirac notation, a spin-up electron can be represented by the ket |↑›, and a spin-down electron can be represented by the ket |↓›. Then, a spin-left electron can be written as (1/√2) |↑› + (1/√2) |↓›, and a spin-right electron can be written as (1/√2) |↑› – (1/√2) |↓›
    Standards Alignment (NGSS):
    • HS-PS4-3 – Evaluate the claims, evidence, and reasoning behind the idea that electromagnetic radiation can be described either by a wave model or a particle model, and that for some situations one model is more useful than the other.
    HS.Phys.2.4AP3
    Learning Outcome: Students will explain that quantum states can be expressed as superpositions of multiple distinguishable states. Students will connect the idea of superposition to vectors that are expressed as combinations of basis vectors. Honors/AP Extension: Students will identify that vectors corresponding to quantum states have a magnitude of one and that distinguishable quantum states corresponding to those with a scalar (inner) product of zero. Examples:
    1. An electron in a general superposition of spin states can be written as a*|↑›+b*|↓›, with the coefficients such that |a|2 + |b|2 = 1.
    2. The horizontal and vertical polarization states are distinguishable, and the vectors representing them have an inner product of zero (‹V|H› = 0).
      Standards Alignment (NGSS):
      • HS-PS4-3 – Evaluate the claims, evidence, and reasoning behind the idea that electromagnetic radiation can be described either by a wave model or a particle model, and that for some situations one model is more useful than the other.

      Quantum Measurement

      Quantum applications are designed to carefully manipulate fragile quantum systems without observation to increase the probability that the final measurement will provide the intended result.

      1. A measurement is an interaction with the quantum system that transforms a state with multiple possible outcomes into a “collapsed” state that now has only one outcome: the measured outcome. (See section on qubits)
      2. A quantum state determines the probability of the outcome of a single quantum measurement, but one outcome rarely reveals complete information about the system.
      3. Repeated measurements on identically prepared quantum systems are required to determine more complete information about the state.
      4. Because of the limitations of quantum measurement (providing only partial information and disturbing the system), quantum states cannot be copied or duplicated.

      Description: In general, the outcomes of quantum measurement are not predetermined. The probabilities of each outcome depends on the quantum state and choice of measurement basis.

      Expectation: Students will be able to calculate the probability of
      obtaining different measurement outcomes, and describe how that probability changes when the measurement basis changes.

      HS.Phys.3.1
      Learning Outcome: Students will be able to contrast classical and quantum measurements. Examples:
      1. Repeated classical measurements should give the same result. In contrast, quantum measurements on identically prepared systems can give random results from a set of possible outcomes with probabilities dictated by the quantum state.
      Standards Alignment (NGSS):
      • HS-PS4-4 – Evaluate the validity and reliability of claims in published materials of the effects that different frequencies of electromagnetic radiation have when absorbed by matter.
      HS.Phys.3.2

      Learning Outcome:
      Students will demonstrate how the probability of measuring a certain outcome depends on both the quantum state and the choice of measurement basis. The choice of measurement basis, which depends on the measurement apparatus, determines which mutually exclusive quantum states are being distinguished from each other.

      Examples:

      1. If a photon is vertically polarized, it will definitely be found as vertical if measured in the horizontal/vertical basis (e.g., with a vertical polarizer). However, if measured in the +45°/−45° diagonal basis (e.g., by rotating the polarizer), the photon will be found in one of the two diagonal states randomly. This can be used to generate fundamentally random
        numbers.

      Note: Honors/AP Extensions related to HS.Phys.3.2 Learning Outcome:

      • HS.Phys.3.2AP1

      Standards Alignment (NGSS):

      • HS-PS4-3 – Evaluate the claims, evidence, and reasoning behind the idea that electromagnetic radiation can be described either by a wave model or a particle model, and that for some situations one model is more useful than the other.
      • HS-PS4-4 – Evaluate the validity and reliability of claims in published materials of the effects that different
        frequencies of electromagnetic radiation have when absorbed by matter.
      • HS-PS4-5 – Communicate technical information about how some technological devices use the principles of wave behavior and wave interactions with matter to transmit and capture information and energy.
      • MS-ETS1-2 – Evaluate competing design solutions using a systematic process to determine how well they meet the criteria and constraints of the problem
      HS.Phys.3.2AP1
      Learning Outcome: Students will demonstrate how the probability of measuring a certain outcome depends on both the quantum state and the choice of measurement basis. The choice of measurement basis, which depends on the measurement apparatus, determines which mutually exclusive quantum states are being distinguished from each other. Honors/AP Extension: Given a quantum state, students will be able to apply the Born rule to calculate the probability of measuring different outcomes in different measurement bases. Examples:
      1.  A photon in a superposition of horizontal and vertical polarizations is written as a|H> + b|V> in Dirac notation. When this photon is measured in the horizontal/vertical basis, it has a probability |a|² of being measured as horizontal, and |b|² of being measured as vertical. The quantum state must be normalized such that |a|²+|b|² = 1, to ensure that the sum of all probabilities add up to 1.
      2. A vertically polarized photon, written in Dirac notation as |V›, will definitely be found in the vertically polarized state when measured with a vertical polarizer, since |‹V|V›|² = 1. However, when measured in the diagonal basis composed of the states |+› = (|H› + |V›)/√2 and |-› = (|H› – |V›)/√2, it will be found in either |+› or |-› randomly, since |‹+|V›|² = |‹-|V›|² = 1/2.
      Standards Alignment (NGSS):
      • HS-PS4-3 – Evaluate the claims, evidence, and reasoning behind the idea that electromagnetic radiation can be described either by a wave model or a particle model, and that for some situations one model is more useful than the other.
      • HS-PS4-4 – Evaluate the validity and reliability of claims in published materials of the effects that different frequencies of electromagnetic radiation have when absorbed by matter.
      • HS-PS4-5 – Communicate technical information about how some technological devices use the principles of wave behavior and wave interactions with matter to transmit and capture information and energy.
      • MS-ETS1-2 – Evaluate competing design solutions using a systematic process to determine how well they meet the criteria and constraints of the problem.
      HS.Phys.3.3
      Learning Outcome: Students will be able to describe how the choice of measurement basis dictates whether or not a state is represented as a superposition. Examples:
      1. A vertically polarized photon is not represented as a superposition in the horizontal/vertical basis, but is represented as a superposition in the +45°/−45° diagonal basis. A +45° polarized photon can be represented as a superposition of horizontal and vertical, but is not represented as a superposition in the +45°/−45° diagonal basis. The choice of representation needed depends on the measurement being performed.
      2. A spin-up electron is always found to be deflected upward in a Stern-Gerlach experiment with magnetic field gradient oriented up/down. Alternatively, it deflects randomly to the left or right when the gradient is oriented left/right because a spin-up electron is a superposition of left and right spins.
      Note: Honors/AP Extensions related to HS.Phys.3.2 Learning Outcome:
      • HS.Phys.3.2AP1
      Standards Alignment (NGSS):
      • HS-PS2-5 – Plan and conduct an investigation to provide evidence that an electric current can produce a magnetic field and that a changing magnetic field can produce an electric current.
      • HS-PS4-3 – Evaluate the claims, evidence, and reasoning behind the idea that electromagnetic radiation can be described either by a wave model or a particle model, and that for some situations one model is more useful than the other.
      • HS-PS4-5 – Communicate technical information about how some technological devices use the principles of wave behavior and wave interactions with matter to transmit and capture information and energy.
      HS.Phys.3.4
      Learning Outcome: Students will describe situations where a quantum measurement changes the quantum state. Examples:
      1. A photon is blocked by two perpendicular polarizers. Inserting a third polarizer between them at a different angle will allow the photon to pass through all three polarizers with some probability due to the additional measurement.
      2. In a Stern-Gerlach experiment, an electron passing through two up/down-oriented magnetic field gradients will deflect the same way in both. If a gradient oriented left/right is introduced between them, the final deflection will be randomly up or down, independent of the first deflection.
      3. In a double-slit experiment, measuring which slit the photon or electron goes through destroys the interference pattern.
        Standards Alignment (NGSS):
        •  HS-PS4-3 – Evaluate the claims, evidence, and reasoning behind the idea that electromagnetic radiation can be described either by a wave model or a particle model, and that for some situations one model is more useful than the other.
        • HS-PS4-5 – Communicate technical information about how some technological devices use the principles of wave behavior and wave interactions with matter to transmit and capture information and energy.
        HS.Phys.3.5
        Learning Outcome: Students will explain how multiple measurements on identically prepared quantum systems are required to estimate the probability of measuring different outcomes and reveal interference patterns. Examples:
        1. To observe the interference pattern in a double-slit experiment, the experiment must be repeated with many individual photons or electrons.
        2. If a photon passes through a vertical polarizer, we can only conclude that it is not horizontally polarized. The experiment must be repeated multiple times with photons in the same polarization state to estimate the probability of the photon passing through the polarizer, and determine whether it was initially in a superposition state.
        Note: Honors/AP Extensions related to HS.Phys.3.2 Learning Outcome:
        • HS.Phys.3.5AP1
          Standards Alignment (NGSS):
          • MS-ETS1-1 – Define the criteria and constraints of a design problem with sufficient precision to ensure a successful solution, taking into account relevant scientific principles and potential impacts on people and the natural environment that may limit possible solutions.
          HS.Phys.3.5AP1
          Learning Outcome: Students will explain how multiple measurements on identically prepared quantum systems are required to estimate the probability of measuring different outcomes and reveal interference patterns. Honors/AP Extension: Students will be able to calculate the expectation value ‹Q› of an observable Q (physically measurable quantity) to describe the average outcome of a large number of measurements on identically prepared systems in a certain state Examples:
          1. Taking the sum of the probabilities multiplied by the corresponding measured values gives the weighted average outcome, known as the expectation value.
          2. If there is a 75% probability of measuring an outcome with a value “+1” and a 25% probability of measuring an outcome with a value “-1”, the expectation value of the measure is 0.75 – 0.25 = 0.5.
          3. If the identically prepared systems are each in the state |ψ>, then ‹Q› = ‹ψ|Q|ψ>.
          Standards Alignment (NGSS):
          • MS-ETS1-1 – Define the criteria and constraints of a design problem with sufficient precision to ensure a successful solution, taking into account relevant scientific principles and potential impacts on people and the natural environment that may limit possible solutions.
          HS.Phys.3.6

          Learning Outcome:
          Students will explain that if the outcomes of a measurement of one property can be perfectly predicted, the measurement outcomes of some other properties would be random and unpredictable.

          Examples:

          1. Momentum and position are incompatible properties in a quantum system. This means that if the quantum state of an electron has a highly certain (precisely known) position, the result of a momentum measurement of the electron in that quantum state will be highly uncertain (very unpredictable), according to the Heisenberg Uncertainty Principle.
          2. For a horizontally polarized photon, a measurement outcome in the horizontal-vertical basis will be perfectly predictable, while a single measurement outcome in the +45°/−45° basis will be completely random.
          3. If we precisely know the value of an electron’s spin in the up/down direction, the value of the spin along the left/right direction is completely unpredictable.

          Note: Honors/AP Extensions related to HS.Phys.3.2 Learning Outcome:

          • HS.Phys.3.6AP1

          Standards Alignment (NGSS):

          • HS-PS2-2 – Use mathematical representations to support the claim that the total momentum of a system of objects is conserved when there is no net force on the system.
          • HS-PS4-3 – Evaluate the claims, evidence, and reasoning behind the idea that electromagnetic radiation can be described either by a wave model or a particle model, and that for some situations one model is more useful than the other.
          • MS-ETS1-1 – Define the criteria and constraints of a design problem with sufficient precision to ensure a successful solution, taking into account relevant scientific principles and potential impacts on people and the natural environment that may limit possible solutions.
          HS.Phys.3.6AP1
          Learning Outcome: Students will explain that if the outcomes of a measurement of one property can be perfectly predicted, the measurement outcomes of some other properties would be random and unpredictable. Honors/AP Extension: Students will be able to calculate the uncertainty (ΔQ) in an observable as (ΔQ)² =‹(Q-‹Q›)²›, or (ΔQ)² = ‹Q²›-‹Q›² Examples:
          1. If the identically prepared systems are each in the state |ψ>, then ‹Q²› = ‹ψ|Q²|ψ› and ‹Q›² = (‹ψ|Q|ψ›)². The variance is the difference, i.e., (ΔQ)² = ‹Q²›-‹Q›², and the uncertainty (standard deviation) is the square root.
          Standards Alignment (NGSS):
          • HS-PS2-2 – Use mathematical representations to support the claim that the total momentum of a system of objects is conserved when there is no net force on the system.
          • HS-PS4-3 – Evaluate the claims, evidence, and reasoning behind the idea that electromagnetic radiation can be described either by a wave model or a particle model, and that for some situations one model is more useful than the other.
          • MS-ETS1-1 – Define the criteria and constraints of a design problem with sufficient precision to ensure a successful solution, taking into account relevant scientific principles and potential impacts on people and the natural environment that may limit possible solutions.

          Qubits

          The quantum bit, or qubit, is the fundamental unit of quantum information, and is encoded in a physical system, such as polarization states of light, energy states of an atom, or spin states of an electron.

          1. Unlike a classical bit, each qubit can represent information in a superposition, or vector sum that incorporates two mutually exclusive quantum states.
          2. At a particular moment in time, a set of n classical bits can exist in only one of 2n possible states, but a set of n qubits can exist in a superposition of all of these states. This capability allows quantum information to be stored and processed in ways that would be difficult or impossible to do classically. (See section on quantum computing)
          3. Multiple qubits can also be entangled, where the measurement outcome of one qubit is correlated with the measurement outcomes of the others.

          Description: The quantum bit, or qubit, is the fundamental unit of quantum information, and it is encoded in a physical
          system, such as polarization states of light, energy states of an atom, or spin states of an electron.

          Expectation: Students will be able to explain how quantum bits differ
          from classical bits, and to identify physical systems that can be used as quantum bits.

          HS.Phys.4.1

          Learning Outcome:
          Students will describe that the smallest unit of information is a bit, which can be in the state “0” or “1”. Students will identify systems that can store classical bits of information.

          Examples:

          1. A bit has the fewest number of mutually exclusive states (two), and we can represent any classical information as a series of bits.
          2. Voltage across an electronic component below and above a threshold can be used to encode “0” or “1” for classical information processing.

          Standards Alignment (NGSS):

          • HS-PS4-2 – Evaluate questions about the advantages of using a digital transmission and storage of information.
          • MS-PS4-3 – Integrate qualitative scientific and technical information to support the claim that digitized signals are a more reliable way to encode and transmit information than analog signals.
          HS.Phys.4.2

          Learning Outcome:
          Students will identify general quantum systems that can serve as quantum bits (qubits) to encode quantum information.

          Examples:

          1. A qubit can be encoded and transmitted using perpendicular polarization states of a photon. For instance, a “0” can be encoded as horizontal polarization and a “1” as vertical polarization.
          2. The spin state of a single electron can be used to encode a qubit, with “0” corresponding to spin-up and “1” corresponding to spin-down.
          3. Two isolated energy levels of an atom (or any quantum system) can be used to encode a qubit, where “0” corresponds to the lower energy and “1” corresponds to the higher energy.

          Note: Honors/AP Extensions related to HS.Phys.3.2 Learning Outcome:

          • HS.Phys.4.2AP1

          Standards Alignment (NGSS):

          • HS-PS1-1 – Use the periodic table as a model to predict the relative properties of elements based on the patterns of electrons in the outermost energy level of atoms.
          • HS-PS4-3 – Evaluate the claims, evidence, and reasoning behind the idea that electromagnetic radiation can be described either by a wave model or a particle model, and that for some situations one model is more useful than the other.
          HS.Phys.4.2AP1

          Learning Outcome:
          Students will identify general quantum systems that can serve as quantum bits (qubits) to encode quantum information.
          Honors/AP Extension: Students will be able to represent the distinguishable states of qubits mathematically and identify how they are encoded in physical systems.

          Examples:

          1. The spin state of a single electron can be written in Dirac notation with |0› representing the spin-up state and |1› representing the spin-down state, or as a column vector with \( \begin{bmatrix}1\\0\end{bmatrix} \) representing the spin-up state and \( \begin{bmatrix}0\\1\end{bmatrix} \) representing the spin-down state.
          2. The state of a qubit can be represented graphically as a point on the Bloch sphere, where mutually exclusive states
            are 180-degrees apart.

          Standards Alignment (NGSS):

          • HS-PS1-1 – Use the periodic table as a model to predict the relative properties of elements based on the patterns of electrons in the outermost energy level of atoms.
          • HS-PS4-3 – Evaluate the claims, evidence, and reasoning behind the idea that electromagnetic radiation can be described either by a wave model or a particle model, and that for some situations one model is more useful than the other.
          HS.Phys.4.3

          Learning Outcome:
          Students will distinguish between a classical bit which can only be in the state “0” or “1” and a qubit which can be
          in the state “0”, “1”, or in a superposition of the states “0” and “1”.

          Examples:

          1. A qubit encoded in the spin of an electron can be in the state “0” (spin-up), the state “1” (spin-down), or in a superposition of the states “0” and “1”.
          2. A qubit encoded in the polarization of a photon can be in the state “0” (horizontal), the state “1” (vertical), or in a superposition of the states “0” and “1” (45° diagonal, for example).

          Standards Alignment (NGSS):

          • HS-PS4-2 – Evaluate questions about the advantages of using a digital transmission and storage of information.
          • MS-ETS1-2 – Evaluate competing design solutions using a systematic process to determine how well they meet the criteria and constraints of the problem.
          HS.Phys.4.4
          Learning Outcome: Students will describe how measuring a qubit can change (collapse) its state, depending on the measurement basis, and that each measurement results in only one bit of information. In contrast, measuring a classical bit does not change its state. Examples:
          1. When a qubit in a superposition of “0” and “1” is measured, the outcome of the measurement will be either “0” or “1” and the qubit will collapse to the corresponding “0” or “1” state.
          2. The possible outcomes of a measurement on a qubit depends upon the choice of measurement basis. For instance, the polarization state of a photon can be measured with a polarizer rotated to any angle, of which there are infinitely many choices corresponding to infinitely many possible measurement bases.
          Standards Alignment (NGSS):
          •  HS-PS4-3 – Evaluate the claims, evidence, and reasoning behind the idea that electromagnetic radiation can be described either by a wave model or a particle model, and that for some situations one model is more useful than the other.
          • HS-PS4-5 – Communicate technical information about how some technological devices use the principles of wave behavior and wave interactions with matter to transmit and capture information and energy.
          HS.Phys.4.5AP1

          Learning Outcome:
          Honors/AP Extension: Students will be able to express the state of a qubit, including superposition states, using
          a mathematical description and relate the amplitudes to measurement probabilities.

          Examples:

          1. A qubit in a superposition state a|0›+b|1› has a probability |a|² of being measured as “0” and a probability |b|² of being measured as “1”.
          2. Two different qubit states with equal probabilities of being found as “0” or “1” are |+› = (|0› + |1›)/√2 and |-› = (|0› – |1›)/√2.
          3. The quantum state (|+› + |-›)/√2 can be expanded in the basis of |0› and |1›, and is equal to |0›.

          Standards Alignment (NGSS):

          • HS-PS4-5 – Communicate technical information about how some technological devices use the principles of wave behavior and wave interactions with matter to transmit and capture information and energy.

          Entanglement

          Entanglement, an inseparable relationship between multiple qubits, is a key property of quantum systems necessary for obtaining a quantum advantage in most QIS applications.

          1. When multiple quantum systems in superposition are entangled, their measurement outcomes are correlated. Entanglement can cause correlations that are different from what is possible in a classical system.
          2. An entangled quantum system of multiple qubits cannot be described solely by specifying an individual quantum state for each qubit.
          3. Quantum technologies rely on entanglement in different ways. When a fragile entangled state is maintained, a computational advantage can be realized. The extreme sensitivity of entangled states, however, can enhance sensing and communication.

          Description: Entanglement is an inseparable relationship between
          multiple qubits, and it is a key property of quantum systems for obtaining a quantum advantage in many QIS applications.

          Expectation: Students will be able to explain that qubits can be entangled with each other, and exhibit correlations distinct
          from classical ones.

          HS.Phys.5.1

          Learning Outcome:
          Students will identify that qubits in an entangled pair share an inseparable quantum state and have measurement outcomes that are correlated with each other.

          Examples:

          1. Two qubits may be entangled such that if one is measured to be “0”, the other will always be measured to be “1”, and vice-versa (this is an example of a Bell state).
          2. Two spin qubits may be entangled such that if one is measured to be spin-up, the other will always be measured as spin-down, and vice-versa. Before the measurement, the outcomes are unknown and we cannot know which qubit will be up (or down). After the measurement, the outcomes will be correlated.
          HS.Phys.5.2

          Learning Outcome:
          Students will describe interactions through which multiple quantum objects may become entangled with each other.

          Examples:

          1. Two photons can become entangled with each other by passing through optical elements, for example in special (nonlinear) crystals/materials.
          2. A high-energy photon can split into an entangled electron-positron pair.
          3. Two qubits can be entangled by a controlled-NOT operation, which is a two-qubit quantum gate for quantum computing.

          Standards Alignment (NGSS):

          • HS-PS2-2 – Use mathematical representations to support the claim that the total momentum of a system of objects is conserved when there is no net force on the system.
          HS.Phys.5.3

          Learning Outcome:
          Students will describe how measuring one qubit in an entangled pair reveals information about the other qubit, no matter how far apart they are.

          Examples:

          1. In certain Bell states, while the outcome of each individual measurement is random, when one qubit is measured to be “0”, the other qubit will with certainty be measured as “1”.
          2. In experiments, entanglement has been demonstrated between photons separated by a long distance.
            HS.Phys.5.4

            Learning Outcome:
            Students will describe that entanglement cannot be used to transmit information faster than the speed of light.

            Examples:

            1. Measuring one qubit in an entangled pair collapses their joint quantum state, regardless of the separation between them. However, this measurement cannot be used to send a signal faster than the speed of light because the outcomes of the measurement are random.
            2. Protocols such as quantum state teleportation use entanglement to perform tasks that could not be accomplished classically, but require classical communication to properly function. Such communication cannot happen faster than light.

            Standards Alignment (NGSS):

            •  HS-PS4-1 – Use mathematical representations to support a claim regarding relationships among the frequency, wavelength, and speed of waves traveling in various media.
            • HS-PS4-5 – Communicate technical information about how some technological devices use the principles of wave behavior and wave interactions with matter to transmit and capture information and energy.
            HS.Phys.5.5AP1

            Learning Outcome:
            Honors/AP Extension: Students will be able to distinguish between states that are entangled and states that are unentangled (separable).

            Examples:

            1. Math expressions that can be factored into functions of single variables are considered “separable”. For example:
              • The expression (x2 – 5) * (1/y + 3) is separable, because it is a function of x (i.e., x2 – 5) times a function of y (i.e., 1/y+3).
              • The expression xy+1/x is inseparable since it cannot be written as a function of x times a function of y.
              • The quantum state |0›|1› is separable, but the quantum state (|0›|1›-|1›|0›)/√2 is inseparable (entangled).
            2. Changing the basis we express a quantum state in does not change whether or not it is entangled.
              • The state (|1›|0›+|1›|1›)/√2 is not entangled since it can be re-written as |1›|+›.
              • However, the state (|0›|0›+|1›|1›)/√2 is entangled since it cannot be written in a separable form.

            Standards Alignment (NGSS):

            •  HS-PS4-3 – Evaluate the claims, evidence, and reasoning behind the idea that electromagnetic radiation can be described either by a wave model or a particle model, and that for some situations one model is more useful than the other.
            HS.Phys.5.6AP1

            Learning Outcome:
            Honors/AP Extension: Students will contrast correlations that can be observed using quantum entanglement
            with classical correlations by considering outcomes in different measurement bases.

            Examples:

            1. The two qubits in the Bell state (|0›|1›-|1›|0›)/√2 exhibit correlations in the basis made of the states |0› and |1›. Noting that |0› = (|+› + |-›)/√2 and |1› = (|+› – |-›)/√2, we can rewrite the Bell state as (|+›|-› – |-›|+›)/√2, showing that the qubits have correlations in the basis made of the states |+› and |-› as well.
            2. Any model of quantum entanglement using a classical framework (local hidden variables) will be unable to describe certain experiments, such as the Einstein-Podolsky-Rosen (EPR) paradox or Bell experiments.
            3. In some games (such as those performed in Bell experiments) where two players must answer questions without directly communicating with each other, they may win more often than classically predicted using entangled states and measurements in different bases.

            Coherence/Decoherence

            For quantum information applications to be successfully completed, fragile quantum states must be preserved, or kept coherent.

            1. Decoherence erodes superposition and entanglement through undesired interaction with the surrounding environment. Uncontrolled radiation, including light, vibration, heat, or magnetic fields, can all cause decoherence.
            2. Some types of qubits are inherently isolated, whereas others require carefully engineered materials to maintain their coherence.
            3. High decoherence rates limit the length and complexity of quantum computations; implementing methods that correct errors can mitigate this issue.

            Description: Decoherence is the process by which superposition and
            entanglement are degraded through undesired interaction with the surrounding environment.

            Expectation: Students will be able to explain how quantum systems can
            be very vulnerable to noise, and describe the engineering and physics challenges to overcome these issues.

            HS.Phys.6.1

            Learning Outcome:
            Students will identify, in broad terms, the challenges in creating low-noise qubits

            Examples:

            1. Errors can corrupt the state of a qubit, resulting in information stored in the qubit being lost.
            2. Radiation can interact with an atom, causing the quantum state of the system to change.
            3. Superconducting qubits interact with background microwave radiation, and this can result in unintended changes to the quantum state of the qubits.
            4. A qubit must be protected from the environment to avoid unintended errors, yet connected to the environment to be initialized, manipulated, and measured. These competing goals are a challenge in manufacturing qubits.

            Standards Alignment (NGSS):

            • HS-ETS1-2 – Design a solution to a complex real-world problem by breaking it down into smaller, more manageable problems that can be solved through engineering.
            • HS-ETS1-3 – Evaluate a solution to a complex real-world problem based on prioritized criteria and trade-offs that account for a range of constraints, including cost, safety, reliability, and aesthetics, as well as possible social, cultural, and environmental impacts.
            • MS-ETS1-2 – Evaluate competing design solutions using a systematic process to determine how well they meet the criteria and constraints of the problem.
            HS.Phys.6.2

            Learning Outcome:
            Students will explain that a small change to a qubit or quantum device can result in errors, whereas a large change is needed to corrupt a classical bit.

            Examples:

            1. A classical bit can only be corrupted by a complete bit flip, since it can only be in the state “0” or “1.” Since the state of a qubit can be a superposition of “0” and “1,” a qubit can also be corrupted by a partial bit flip, which affects the superposition.
            2. If a polarization measurement or Stern-Gerlach experiment occurs at an angle that is different from what was intended, the state will collapse to a different one than what was intended, causing a measurement error.

            Standards Alignment (NGSS):

            • HS-PS4-2 – Evaluate questions about the advantages of using a digital transmission and storage of information.
            • HS-PS4-3 – Evaluate the claims, evidence, and reasoning behind the idea that electromagnetic radiation can be described either by a wave model or a particle model, and that for some situations one model is more useful than the other.
            HS.Phys6.3

            Learning Outcome:
            Students will describe how quantum bits are sensitive to multiple types of errors.

            Examples:

            1. A qubit can be corrupted by flipping from the “0” state to the “1” state, or by a change in superposition (the “+” state to the “-” state, for example).
            2. A polarized photon could be corrupted if the horizontal polarization state is flipped to vertical, but could be corrupted in another way if the +45° polarization state is flipped to −45°.

            Standards Alignment (NGSS):

            • HS-PS4-5 – Communicate technical information about how some technological devices use the principles of wave behavior and wave interactions with matter to transmit and capture information and energy.
              HS.Phys.6.4

              Learning Outcome:
              Students will describe how quantum superposition and entanglement can be lost if information about the quantum state is leaked to the outside environment.

              Examples:

              1. If information about which slit the photon goes through in a double-slit experiment or which path it takes in a MachZehnder interferometer is obtainable (for example, with different polarizations in each slit/arm of the interferometer), the interference will be lost. These are called “which-way” or “which-path” experiments.
              2. If information is available about whether a qubit is in the “0” or “1” state, it will lose its superposition. This occurs regardless of whether the information is obtained by a human observer or through other interactions with the environment.

              Standards Alignment (NGSS):

              • HS-PS4-2 – Evaluate questions about the advantages of using a digital transmission and storage of information.
              • HS-PS4-3 – Evaluate the claims, evidence, and reasoning behind the idea that electromagnetic radiation can be described either by a wave model or a particle model, and that for some situations one model is more useful than the other.
              • HS-PS4-5 – Communicate technical information about how some technological devices use the principles of wave behavior and wave interactions with matter to transmit and capture information and energy.
              HS.Phys.6.5

              Learning Outcome:
              Students will compare the challenges of quantum error correction to those of classical error correction.

              Examples:

              1. Both classical and quantum error correcting codes protect against errors by encoding logical bits/qubits across many physical bits/qubits. Classical errors can be diagnosed by reading the bits, but quantum errors require special measurements on multiple qubits to diagnose.
              2. A classical bit can be copied to create backups, but it is impossible to copy a general quantum state due to the nocloning theorem.
              3. Honors/AP Example: Quantum error correction must be able to correct both phase- and bit-flip errors. Classical error correction only needs to correct bit-flip errors.
              4. Honors/AP Example: Methods from classical error correction, such as the repetition code, cannot be straightforwardly adapted to quantum error correction due to restrictions such as the no-cloning theorem and the collapse of quantum states after a measurement.

              Standards Alignment (NGSS):

              • HS-PS2-6 – Communicate scientific and technical information about why the molecular-level structure is important in the functioning of designed materials.
              • HS-ETS1-2 – Design a solution to a complex real-world problem by breaking it down into smaller, more manageable problems that can be solved through engineering.
              • HS-ETS1-3 – Evaluate a solution to a complex real-world problem based on prioritized criteria and trade-offs that
                account for a range of constraints, including cost, safety, reliability, and aesthetics, as well as possible social, cultural, and environmental impacts.
              • MS-ETS1-2 – Evaluate competing design solutions using a systematic process to determine how well they meet the criteria and constraints of the problem.

              Quantum Computing

              Quantum computers, which use qubits and quantum operations, will solve certain complex computational problems more efficiently than classical computers.

              1. Qubits can represent information compactly; more information can be stored and processed using 100 qubits than with the largest conceivable classical supercomputer.
              2. Quantum data can be kept in a superposition of exponentially many classical states during processing, giving quantum computers a significant speed advantage for certain computations such as factoring large numbers (exponential speed-up) and performing searches (quadratic speed-up). However, there is no speed advantage for many other types of computations.
              3. A fault-tolerant quantum computer corrects all errors that occur during quantum computation, including those arising from decoherence, but error correction requires significantly more resources than the original computation.

              Description: Quantum computers, which use qubits and quantum
              operations, will solve certain complex computational problems more efficiently than classical computers.

              Expectation: Students will explain which properties of quantum
              mechanics allow for a computational advantage and the potential applications and challenges of quantum computing.

              HS.Phys.7.1

              Learning Outcome:
              Students will differentiate the properties of classical bits and quantum bits.

              Examples:

              1. Qubits can be kept in superposition states and entangled with one another, unlike classical bits.
              2. There are infinitely many bases in which we can represent a qubit. The outcomes and associated probabilities depend on the measurement basis. In contrast, a classical bit can only be in the state “0” or “1” and can only be measured as “0” or “1”.
              3. Three bits can be in one of eight possible states (000, 001, etc). Three qubits can be in a superposition state of all eight states until measured, represented by eight complex numbers. Four qubits can be in a superposition of sixteen states and five qubits can be in a superposition of thirty-two states.
              4.  2N (complex) numbers are generally required to represent a quantum state of N qubits. As the number of qubits grows, an exponentially growing number of classical bits are generally required to model the quantum state.
              5. It is impossible to describe even a modest collection of qubits (~300) in the largest classical computers, since it would require storing too many numbers.
              6. Honors/AP Example: The state vector for a system with N qubits has a dimension of 2N.
                • For example, a three-qubit system is represented by a 2³= 8 dimensional complex vector, with basis states |000›, |001›, etc., and the three-qubit state can be in any superposition of those 8 basis states, e.g., a|000›+b|0 01›+c|010›+d|011›+e|100›+f|101›+g|110›+h|111›, where the coefficients can evolve over time.

              Standards Alignment (NGSS):

              • HS-PS4-2 – Evaluate questions about the advantages of using a digital transmission and storage of information.
              • HS-ETS1-3 – Evaluate a solution to a complex real-world problem based on prioritized criteria and trade-offs that account for a range of constraints, including cost, safety, reliability, and aesthetics, as well as possible social, cultural, and environmental impacts.
              • MS-ETS1-2 – Evaluate competing design solutions using a systematic process to determine how well they meet the criteria and constraints of the problem.
              HS.Phys.7.2

              Learning Outcome:
              Students will describe what an algorithm is, and how quantum computers run algorithms in fundamentally different ways than classical computers.

              Examples:

              1. Algorithms can be thought of as recipes for processing information and solving problems.
              2. In classical computers, algorithms define how we prepare, manipulate, and measure the states of bits. In quantum computers, quantum algorithms define how we prepare, manipulate, and measure the states of qubits.
              3. Classical computers give definite outputs when they run an algorithm. Quantum computers have outcomes determined by probabilities, and quantum algorithms are used to increase the probability of finding the right answer from all possible outputs.
              4. Quantum algorithms manipulate quantum states involving superposition and entanglement, and they use interference to maximize the probability of finding the right answer. As the number of qubits grows, the number of terms in the multi-qubit superposition can grow exponentially, which could contribute to the advantage that quantum computers have for specific tasks.
              5. In the Deutsch-Jozsa problem, the goal is to determine a property of a function. Using a classical computer, solving this problem requires many evaluations of the function. Using a quantum computer, the problem can be solved using only one evaluation of the function.

              Standards Alignment (NGSS):

              • HS-ETS1-2 – Design a solution to a complex real-world problem by breaking it down into smaller, more manageable problems that can be solved through engineering.
              • HS-ETS1-3 – Evaluate a solution to a complex real-world problem based on prioritized criteria and trade-offs that
                account for a range of constraints, including cost, safety, reliability, and aesthetics, as well as possible social, cultural, and environmental impacts.
              • MS-ETS1-2 – Evaluate competing design solutions using a systematic process to determine how well they meet the criteria and constraints of the problem.
              HS.Phys7.3AP1

              Learning Outcome:
              Honors/AP Extension: Students will be able to represent quantum algorithms as quantum circuit diagrams. They will also be able to represent quantum gates as matrices that operate on state vectors through matrix multiplication

              Examples:

              1. A quantum circuit is a diagram representing a quantum program. It depicts how the state of the qubits evolves as gates and measurements are performed on them.
              2. The X gate, also called the NOT gate, is a single-qubit gate that flips the |0› and |1› components. However, it does not have this same effect in other bases (e.g., with the states |+› and |-›). It can be represented by a 2×2 matrix.
              3. The “Z” gate leaves |0› unchanged and applies a phase of -1 to the |1› state, while the “T” gate applies a phase of e(iπ/4) to |1› instead. A general phase shift gate adjusts the complex phase between the |0› and |1› components.
              4. The Hadamard gate converts the |0› and |1› state to the |+› and |-› states, and vice-versa. It can be represented by a 2×2 matrix. A Hadamard gate followed by a measurement in the 0/1 basis is equivalent to a measurement in the +/- basis.
              5. The controlled-NOT (CNOT) gate is a two-qubit gate that applies a NOT (X) gate to one qubit depending on the state of a second qubit. It can be represented by a 4×4 matrix mathematically.
              6. Applying quantum gates does not destroy information. Any quantum gate is reversible.

              Standards Alignment (NGSS):

              • HS-ETS1-2 – Design a solution to a complex real-world problem by breaking it down into smaller, more manageable problems that can be solved through engineering.
                HS.Phys.7.4AP1

                Learning Outcome:
                Honors/AP Extension: Students will identify properties of a universal set of quantum gates, from which any
                quantum circuit can be constructed.

                Examples:

                1. An example of a universal set of gates consists of the CNOT (which produces entanglement), Hadamard (which creates superpositions), and T gates (which adjusts phases).
                2. A universal set of quantum gates cannot be constructed with only single-qubit gates, as there is no way to create entanglement without multi-qubit gates.
                3.  A CNOT and two Hadamard gates can be used to construct a controlled-Z gate, which applies a Z gate to one qubit depending on the state of the other qubit.

                Standards Alignment (NGSS):

                • HS-ETS1-2 – Design a solution to a complex real-world problem by breaking it down into smaller, more manageable problems that can be solved through engineering.
                HS.Phys.7.5

                Learning Outcome:
                Students will describe potential use cases for quantum computers, and the advantages they can provide over classical algorithms.

                Examples:

                1. Finding the prime factors of large numbers is believed to be exponentially more difficult for classical computers as the number grows in size. By comparison, the difficulty grows at a much more reasonable rate if we are able to use Shor’s algorithm on quantum computers.
                2. Quantum computers can be used to simulate complex quantum systems. This has the potential to solve problems more efficiently in chemistry, such as finding the energies and structure of atoms and molecules, with potential applications in environmental science, medicine, materials science, agriculture and more.
                3. For search problems where a classical computer must check each item one-by-one, quantum computers can search quadratically faster using Grover’s algorithm.

                Standards Alignment (NGSS):

                • MS-PS1-1 – Develop models to describe the atomic composition of simple molecules and extended structures.
                • MS-PS1-3 – Gather and make sense of information to describe that synthetic materials come from natural resources and impact society.
                • HS-PS2-6 – Communicate scientific and technical information about why the molecular-level structure is important in the functioning of designed materials.
                • HS-ETS1-1 – Analyze a major global challenge to specify qualitative and quantitative criteria and constraints for solutions that account for societal needs and wants.
                • HS-ETS1-3 – Evaluate a solution to a complex real-world problem based on prioritized criteria and trade-offs that account for a range of constraints, including cost, safety, reliability, and aesthetics, as well as possible social, cultural, and environmental impacts.
                • HS-ETS1-4 – Use a computer simulation to model the impact of proposed solutions to a complex real-world problem with numerous criteria and constraints on interactions within and between systems relevant to the problem.
                • MS-ETS1-2 – Evaluate competing design solutions using a systematic process to determine how well they meet the criteria and constraints of the problem.
                • MS-ETS1-3 – Analyze data from tests to determine similarities and differences among several design solutions to identify the best characteristics of each that can be combined into a new solution to better meet the criteria for success.
                HS.Phys.7.6

                Learning Outcome:
                Students will explain that quantum computers have limits as to how quickly they can solve problems.

                Examples:

                1. Quantum computers are special-purpose machines that provide a computational speedup that varies depending on the problem that is being solved. They are not suitable for all computational problems and applications.
                2. A quantum superposition can contain information about many potential answers to a problem, but due to quantum state collapse, only one answer can be extracted per run. This is distinct from classical parallel computing, where multiple answers can be obtained simultaneously.
                3. Honors/AP Example: A quantum search algorithm can find a solution in the square root of the amount of time that a classical algorithm takes. For problems where the time needed grows exponentially with the size of the system, the speed-up from the quantum search algorithm will not be sufficient to solve the problem in a reasonable amount of time.

                Standards Alignment (NGSS):

                • HS-ETS1-3 – Evaluate a solution to a complex real-world problem based on prioritized criteria and trade-offs that account for a range of constraints, including cost, safety, reliability, and aesthetics, as well as possible social, cultural, and environmental impacts.
                • MS-ETS1-2 – Evaluate competing design solutions using a systematic process to determine how well they meet the criteria and constraints of the problem.
                • MS-ETS1-3 – Analyze data from tests to determine similarities and differences among several design solutions to identify the best characteristics of each that can be combined into a new solution to better meet the criteria for success.
                HS.Phys.7.7

                Learning Outcome:
                Students will describe different physical systems that can be used to build quantum computing devices.

                Examples:

                1. The energy states of a variety of atoms can be used as qubits. In these systems, atoms are isolated and manipulated with laser beams to process quantum information or simulate other quantum systems.
                2. Cryogenically cooled circuits made of superconducting material can be used as qubits. In these systems, physical
                  attributes of the circuit are manipulated using microwaves to process quantum information and simulate other quantum systems.
                3. Qubits can be encoded in various quantum states of light. Optical elements, such as beam splitters are used to process quantum information.

                Standards Alignment (NGSS):

                • HS-PS1-1 – Use the periodic table as a model to predict the relative properties of elements based on the patterns of electrons in the outermost energy level of atoms.
                • HS-PS2-5 – Plan and conduct an investigation to provide evidence that an electric current can produce a magnetic field and that a changing magnetic field can produce an electric current.
                • HS-PS2-6 – Communicate scientific and technical information about why the molecular-level structure is important in the functioning of designed materials.
                • HS-PS4-3 – Evaluate the claims, evidence, and reasoning behind the idea that electromagnetic radiation can be described either by a wave model or a particle model, and that for some situations one model is more useful than the other.
                • HS-ETS1-3 – Evaluate a solution to a complex real-world problem based on prioritized criteria and trade-offs that account for a range of constraints, including cost, safety, reliability, and aesthetics, as well as possible social, cultural, and environmental impacts.
                HS.Phys.7.8

                Learning Outcome:
                Students will describe the engineering challenges faced in building large-scale quantum computers

                Examples:

                1. Modern quantum computing devices have many sources of noise, including decoherence, imprecise control, and
                  readout errors.
                2. Minimizing decoherence is the major challenge for building quantum computers with many qubits. Quantum error correcting codes can protect against decoherence but require complex measurements and many additional qubits.
                3. Building a quantum computer requires precise control of the qubits’ quantum state, which are encoded in fragile physical systems that are susceptible to noise.
                4. Quantum computers require qubits that are both strictly isolated from each other and able to be entangled with each other. Controlling isolated systems is difficult, and that difficulty increases as the number of qubits increases.

                Standards Alignment (NGSS):

                • HS-ETS1-1 – Analyze a major global challenge to specify qualitative and quantitative criteria and constraints for solutions that account for societal needs and wants.
                • HS-ETS1-2 – Design a solution to a complex real-world problem by breaking it down into smaller, more manageable problems that can be solved through engineering.
                • HS-ETS1-3 – Evaluate a solution to a complex real-world problem based on prioritized criteria and trade-offs that
                  account for a range of constraints, including cost, safety, reliability, and aesthetics, as well as possible social, cultural, and environmental impacts.
                • MS-ETS1-2 – Evaluate competing design solutions using a systematic process to determine how well they meet the criteria and constraints of the problem.
                • MS-ETS1-3 – Analyze data from tests to determine similarities and differences among several design solutions to identify the best characteristics of each that can be combined into a new solution to better meet the criteria for success.

                Quantum Communication

                Quantum communication uses entanglement or a transmission channel, such as optical fiber, to transfer quantum information between different locations.

                1. Quantum teleportation is a protocol that uses entanglement to destroy quantum information at one location and recreate it at a second site, without transferring physical qubits.
                2. Quantum cryptography enhances privacy based on quantum physics principles and cannot be circumvented. Due to the fragility of quantum systems, an eavesdropper’s interloping measurement will almost always be detected.

                Description: Quantum communication uses entanglement or a transmission channel to transfer quantum information between different locations.

                Expectation: Students will be able to describe (1) how quantum key
                distribution can be used to securely establish shared secret keys, (2) how quantum information can be transferred through physical channels, and (3) how quantum information can be teleported using entanglement.

                HS.Phys.8.1a

                Learning Outcome:
                Students will be able to describe the context and procedure of a quantum key distribution protocol (such as BB84), which solves the classical problem of generating secure secret shared keys. (HS.Phys.8.1)

                Students will be able to distinguish between a message (plaintext), a key, and an encrypted message (ciphertext).

                Standards Alignment (NGSS):

                • HS-PS4-2 – Evaluate questions about the advantages of using a digital transmission and storage of
                  information.
                • HS-PS4-3 – Evaluate the claims, evidence, and reasoning behind the idea that electromagnetic radiation can be described either by a wave model or a particle model, and that for some situations one model is more useful than the other.
                • HS-PS4-5 – Communicate technical information about how some technological devices use the principles of wave behavior and wave interactions with matter to transmit and capture information and energy.
                • MS-PS4-3 – Integrate qualitative scientific and technical information to support the claim that digitized signals are a more reliable way to encode and transmit information than analog signals.
                • HS-ETS1-2 – Design a solution to a complex real-world problem by breaking it down into smaller, more manageable problems that can be solved through engineering.
                • HS-ETS1-3 – Evaluate a solution to a complex real-world problem based on prioritized criteria and trade-offs that account for a range of constraints, including cost, safety, reliability, and aesthetics, as well as possible social, cultural, and environmental impacts.
                • MS-ETS1-2 – Evaluate competing design solutions using a systematic process to determine how well they meet the criteria and constraints of the problem.
                • MS-ETS1-3 – Analyze data from tests to determine similarities and differences among several design solutions to identify the best characteristics of each that can be combined into a new solution to better meet the criteria for success.
                HS.Phys.8.1b

                Learning Outcome:
                Students will be able to describe the context and procedure of a quantum key distribution protocol (such as BB84), which solves the classical problem of generating secure secret shared keys. (HS.Phys.8.1)

                Students will explain how a message can be securely sent over a public channel by encrypting and decrypting it using a shared secret key.

                Examples:

                1. The one-time pad protocol uses a secret key made up of random shared numbers to encrypt and decrypt a message.
                2. Eavesdroppers are able to see encrypted messages but are unable to decrypt them without the secret keys.

                Standards Alignment (NGSS):

                • HS-PS4-2 – Evaluate questions about the advantages of using a digital transmission and storage of information.
                • HS-PS4-3 – Evaluate the claims, evidence, and reasoning behind the idea that electromagnetic radiation can be described either by a wave model or a particle model, and that for some situations one model is more useful than the other.
                • HS-PS4-5 – Communicate technical information about how some technological devices use the principles of wave behavior and wave interactions with matter to transmit and capture information and energy.
                • MS-PS4-3 – Integrate qualitative scientific and technical information to support the claim that digitized signals are a more reliable way to encode and transmit information than analog signals.
                • HS-ETS1-2 – Design a solution to a complex real-world problem by breaking it down into smaller, more manageable problems that can be solved through engineering.
                • HS-ETS1-3 – Evaluate a solution to a complex real-world problem based on prioritized criteria and trade-offs that account for a range of constraints, including cost, safety, reliability, and aesthetics, as well as possible social, cultural, and environmental impacts.
                • MS-ETS1-2 – Evaluate competing design solutions using a systematic process to determine how well they meet the criteria and constraints of the problem.
                • MS-ETS1-3 – Analyze data from tests to determine similarities and differences among several design solutions to identify the best characteristics of each that can be combined into a new solution to better meet the criteria for success.
                HS.Phys8.1c

                Learning Outcome:
                Students will be able to describe the context and procedure of a quantum key distribution protocol (such as BB84), which solves the classical problem of generating secure secret shared keys. (HS.Phys.8.1)

                Students will be able to explain how two parties are only guaranteed to obtain the same outcome when measuring a qubit if they measure in the same basis

                Examples:

                1. If a sender (Alice) measures a photon in the horizontal/vertical basis, and then a receiver (Bob) measures the same photon in the same basis, they will get the same outcome.
                2. If a sender (Alice) measures a photon in the horizontal/vertical basis, and then a receiver (Bob) measures the same photon in the diagonal basis, they may get different outcomes.

                Standards Alignment (NGSS):

                • HS-PS4-2 – Evaluate questions about the advantages of using a digital transmission and storage of information.
                • HS-PS4-3 – Evaluate the claims, evidence, and reasoning behind the idea that electromagnetic radiation can be described either by a wave model or a particle model, and that for some situations one model is more useful than the other.
                • HS-PS4-5 – Communicate technical information about how some technological devices use the principles of wave behavior and wave interactions with matter to transmit and capture information and energy.
                • MS-PS4-3 – Integrate qualitative scientific and technical information to support the claim that digitized signals are a more reliable way to encode and transmit information than analog signals.
                • HS-ETS1-2 – Design a solution to a complex real-world problem by breaking it down into smaller, more manageable problems that can be solved through engineering.
                • HS-ETS1-3 – Evaluate a solution to a complex real-world problem based on prioritized criteria and trade-offs that account for a range of constraints, including cost, safety, reliability, and aesthetics, as well as possible social, cultural, and environmental impacts.
                • MS-ETS1-2 – Evaluate competing design solutions using a systematic process to determine how well they meet the criteria and constraints of the problem.
                • MS-ETS1-3 – Analyze data from tests to determine similarities and differences among several design solutions to identify the best characteristics of each that can be combined into a new solution to better meet the criteria for success.
                  HS.Phys.8.1d

                  Learning Outcome:
                  Students will be able to describe the context and procedure of a quantum key distribution protocol (such as BB84), which solves the classical problem of generating secure secret shared keys. (HS.Phys.8.1)

                  Students will describe how, in general, the state of a qubit can change when measured and cannot be copied (cloned).

                  Examples:

                  1. If a horizontally polarized photon is measured in the diagonal basis and then measured in the horizontal/vertical basis, it will not necessarily be horizontally polarized anymore.
                  2. The no-cloning theorem forbids a general unknown quantum state from being copied. In contrast, classical bits can be copied without disturbing or destroying the original bits.

                  Standards Alignment (NGSS):

                  • HS-PS4-2 – Evaluate questions about the advantages of using a digital transmission and storage of information.
                  • HS-PS4-3 – Evaluate the claims, evidence, and reasoning behind the idea that electromagnetic radiation can be described either by a wave model or a particle model, and that for some situations one model is more useful than the other.
                  • HS-PS4-5 – Communicate technical information about how some technological devices use the principles of wave behavior and wave interactions with matter to transmit and capture information and energy.
                  • MS-PS4-3 – Integrate qualitative scientific and technical information to support the claim that digitized signals are a more reliable way to encode and transmit information than analog signals.
                  • HS-ETS1-2 – Design a solution to a complex real-world problem by breaking it down into smaller, more manageable problems that can be solved through engineering.
                  • HS-ETS1-3 – Evaluate a solution to a complex real-world problem based on prioritized criteria and trade-offs that account for a range of constraints, including cost, safety, reliability, and aesthetics, as well as possible social, cultural, and environmental impacts.
                  • MS-ETS1-2 – Evaluate competing design solutions using a systematic process to determine how well they meet the criteria and constraints of the problem.
                  • MS-ETS1-3 – Analyze data from tests to determine similarities and differences among several design solutions to identify the best characteristics of each that can be combined into a new solution to better meet the criteria for success.
                  HS.Phys.8.1e

                  Learning Outcome:
                  Students will be able to describe the context and procedure of a quantum key distribution protocol (such as BB84), which solves the classical problem of generating secure secret shared keys. (HS.Phys.8.1)

                  Students will explain that the sender and receiver must share classical information with each other in order to extract a secret key from their qubit transmission process.

                  Examples:

                  1. In BB84, the sender and receiver must share the bases they used for each preparation/measurement with each other. This reveals no information about the secret key to an eavesdropper.

                  Standards Alignment (NGSS):

                  • HS-PS4-2 – Evaluate questions about the advantages of using a digital transmission and storage of information.
                  • HS-PS4-3 – Evaluate the claims, evidence, and reasoning behind the idea that electromagnetic radiation can be described either by a wave model or a particle model, and that for some situations one model is more useful than the other.
                  • HS-PS4-5 – Communicate technical information about how some technological devices use the principles of wave behavior and wave interactions with matter to transmit and capture information and energy.
                  • MS-PS4-3 – Integrate qualitative scientific and technical information to support the claim that digitized signals are a more reliable way to encode and transmit information than analog signals.
                  • HS-ETS1-2 – Design a solution to a complex real-world problem by breaking it down into smaller, more manageable problems that can be solved through engineering.
                  • HS-ETS1-3 – Evaluate a solution to a complex real-world problem based on prioritized criteria and trade-offs that account for a range of constraints, including cost, safety, reliability, and aesthetics, as well as possible social, cultural, and environmental impacts.
                  • MS-ETS1-2 – Evaluate competing design solutions using a systematic process to determine how well they meet the criteria and constraints of the problem.
                  • MS-ETS1-3 – Analyze data from tests to determine similarities and differences among several design solutions to identify the best characteristics of each that can be combined into a new solution to better meet the criteria for success.
                  HS.Phys.8.1g

                  Learning Outcome:
                  Students will be able to describe the context and procedure of a quantum key distribution protocol (such as BB84), which solves the classical problem of generating secure secret shared keys. (HS.Phys.8.1)

                  Students will explain which properties of quantum information allow for quantum key distribution to have advantages over classical techniques.

                  Examples:

                  1. BB84 relies on the ability to prepare and measure qubits in multiple bases.
                  2. Quantum key distribution would not work if it were possible to copy an arbitrary quantum state, as the eavesdropper could make many copies of each qubit and determine their quantum states.

                  Standards Alignment (NGSS):

                  • HS-PS4-2 – Evaluate questions about the advantages of using a digital transmission and storage of information.
                  • HS-PS4-3 – Evaluate the claims, evidence, and reasoning behind the idea that electromagnetic radiation can be described either by a wave model or a particle model, and that for some situations one model is more useful than the other.
                  • HS-PS4-5 – Communicate technical information about how some technological devices use the principles of wave behavior and wave interactions with matter to transmit and capture information and energy.
                  • MS-PS4-3 – Integrate qualitative scientific and technical information to support the claim that digitized signals are a more reliable way to encode and transmit information than analog signals.
                  • HS-ETS1-2 – Design a solution to a complex real-world problem by breaking it down into smaller, more manageable problems that can be solved through engineering.
                  • HS-ETS1-3 – Evaluate a solution to a complex real-world problem based on prioritized criteria and trade-offs that account for a range of constraints, including cost, safety, reliability, and aesthetics, as well as possible social, cultural, and environmental impacts.
                  • MS-ETS1-2 – Evaluate competing design solutions using a systematic process to determine how well they meet the criteria and constraints of the problem.
                  • MS-ETS1-3 – Analyze data from tests to determine similarities and differences among several design solutions to identify the best characteristics of each that can be combined into a new solution to better meet the criteria for success.
                  HS.Phys.8.2

                  Learning Outcome:
                  Students will recognize the emerging opportunities and challenges of building long-distance quantum networks,
                  such as a quantum internet.

                  Examples:

                  1. One way to send photons over long distances is to use optical fibers. However, many will be lost due to absorption. Unlike classical fiber optic communications, photons cannot be amplified to account for this loss.
                  2. Quantum networks that can transmit photons would allow users to perform quantum key distribution to securely communicate and distribute entangled qubits.

                  Standards Alignment (NGSS):

                  • HS-PS4-2 – Evaluate questions about the advantages of using a digital transmission and storage of information.
                  • HS-PS4-3 – Evaluate the claims, evidence, and reasoning behind the idea that electromagnetic radiation can be described either by a wave model or a particle model, and that for some situations one model is more useful than the other.
                  • HS-PS4-5 – Communicate technical information about how some technological devices use the principles of wave behavior and wave interactions with matter to transmit and capture information and energy.
                  • MS-PS4-3 – Integrate qualitative scientific and technical information to support the claim that digitized signals are a more reliable way to encode and transmit information than analog signals.
                  • HS-ETS1-2 – Design a solution to a complex real-world problem by breaking it down into smaller, more manageable problems that can be solved through engineering.
                  • HS-ETS1-3 – Evaluate a solution to a complex real-world problem based on prioritized criteria and trade-offs that account for a range of constraints, including cost, safety, reliability, and aesthetics, as well as possible social, cultural, and environmental impacts.
                  • MS-ETS1-2 – Evaluate competing design solutions using a systematic process to determine how well they meet the criteria and constraints of the problem.
                  • MS-ETS1-3 – Analyze data from tests to determine similarities and differences among several design solutions to identify the best characteristics of each that can be combined into a new solution to better meet the criteria for success.
                  HS.Phys.8.3a

                  Learning Outcome:
                  Students will be able to explain the ideas of quantum teleportation, and describe that the information in the quantum state is what is teleported. (HS.Phys.8.3)

                  Students will contrast the challenges of transferring quantum information between systems compared to classical
                  communication.

                  Examples:

                  1. Qubits encoded in trapped atoms cannot be transported by physically moving the atoms out of the trap, but must have their quantum information transported using other systems, such as photons.
                  2. Quantum information cannot be cloned. It is not possible to keep a backup copy in case a qubit is lost during transmission.

                  Standards Alignment (NGSS):

                  • HS-PS4-2 – Evaluate questions about the advantages of using a digital transmission and storage of information.
                  • HS-ETS1-2 – Design a solution to a complex real-world problem by breaking it down into smaller, more manageable problems that can be solved through engineering.
                  • MS-ETS1-3 – Analyze data from tests to determine similarities and differences among several design solutions to identify the best characteristics of each that can be combined into a new solution to better meet the criteria for success.
                  HS.Phys.8.3b

                  Learning Outcome:
                  Students will be able to explain the ideas of quantum teleportation, and describe that the information in the quantum state is what is teleported. (HS.Phys.8.3)

                  Students will describe how an unknown quantum state can be teleported using an entangled state and two classical bits of communication, which destroys the original quantum state in the process.

                  Examples:

                  1. Alice and Bob share an entangled pair of qubits, and Alice has a separate qubit whose unknown quantum state she wishes to send to Bob; there are three qubits in total. If Alice then measures her two qubits, destroying her original quantum states, and tells Bob the result of her measurement, Bob can apply appropriate quantum gates to his qubit to match the state of the original qubit that Alice wanted to send. Here, entanglement provides an efficient portal for transporting quantum information, but not matter.

                  Standards Alignment (NGSS):

                  • HS-PS4-2 – Evaluate questions about the advantages of using a digital transmission and storage of information.
                  • HS-ETS1-2 – Design a solution to a complex real-world problem by breaking it down into smaller, more manageable problems that can be solved through engineering.
                  • MS-ETS1-3 – Analyze data from tests to determine similarities and differences among several design solutions to identify the best characteristics of each that can be combined into a new solution to better meet the criteria for success.
                  HS.Phys.8.3cAP1

                  Learning Outcome:
                  Students will be able to explain the ideas of quantum teleportation, and describe that the information in the quantum state is what is teleported. (HS.Phys.8.3)

                  Honors/AP Extension: Students will be able to draw the quantum circuit for teleportation and show the effects of
                  each operation by expressing how the quantum state of the three qubits changes throughout the protocol.

                  Examples:

                  1. At the start of the protocol, Alice has an unknown qubit in the state a|0›+b|1› that she wishes to teleport to Bob and Alice and Bob share an entangled state (|00›+|11›)/√2. The three-qubit state is (a|0›+b|1›)(|00›+|11›)/√2.

                  Standards Alignment (NGSS):

                  • HS-PS4-2 – Evaluate questions about the advantages of using a digital transmission and storage of information.
                  • HS-ETS1-2 – Design a solution to a complex real-world problem by breaking it down into smaller, more manageable problems that can be solved through engineering.
                  • MS-ETS1-3 – Analyze data from tests to determine similarities and differences among several design solutions to identify the best characteristics of each that can be combined into a new solution to better meet the criteria for success.
                  HS.Phys.8.3d

                  Learning Outcome:
                  Students will be able to explain the ideas of quantum teleportation, and describe that the information in the quantum state is what is teleported. (HS.Phys.8.3)

                  Students will identify that the quantum teleportation protocol teleports the state of the qubit rather than the matter, and it does not allow for cloning quantum states or faster-than-light communication.

                  Examples:

                  1. In the quantum teleportation protocol, Alice must tell Bob the result of her measurement. This classical communication cannot be transmitted faster than the speed of light.
                  2. The original qubit state that Alice teleported to Bob is destroyed during the quantum teleportation protocol, leaving Bob with the only copy of the state.

                  Standards Alignment (NGSS):

                  • HS-PS4-2 – Evaluate questions about the advantages of using a digital transmission and storage of information.
                  • HS-ETS1-2 – Design a solution to a complex real-world problem by breaking it down into smaller, more manageable problems that can be solved through engineering.
                  • MS-ETS1-3 – Analyze data from tests to determine similarities and differences among several design solutions to identify the best characteristics of each that can be combined into a new solution to better meet the criteria for success.
                  HS.Phys.8.4

                  Learning Outcome:
                  Students will explain how quantum communication protocols often rely on shared entanglement.

                  Examples:

                  1. Quantum teleportation can be used to transmit the state of a qubit using two classical bits and shared entanglement. Even if the qubit state was known beforehand, it would take many more classical bits to share its precise quantum state.
                  2. Honors/AP Example: In the superdense coding protocol, if they use a pair of entangled qubits, Alice can send two bits of classical information to Bob by only sending one qubit.

                  Standards Alignment (NGSS):

                  • MS-ETS1-3 – Analyze data from tests to determine similarities and differences among several design solutions to identify the best characteristics of each that can be combined into a new solution to better meet the criteria for success.

                  Quantum Sensors

                  Quantum sensing uses quantum states to detect and measure physical properties with the highest precision allowed by quantum mechanics.

                  1. The Heisenberg uncertainty principle describes a fundamental limit in simultaneously measuring two specific, separate attributes. “Squeezing” deliberately sacrifices the certainty of measuring one attribute in order to achieve higher precision in measuring the other attribute; for example, squeezing is used in LIGO to improve sensitivity to gravitational waves.
                  2. Quantum sensors take advantage of the fact that physical qubits are extremely sensitive to their surroundings. The same fragility that leads to rapid decoherence enables precise sensors. Examples include magnetometers, single-photon detectors, and atomic clocks for improvements in medical imaging and navigation, position, and timing.
                  3. Quantum sensing has vastly improved the precision and accuracy of measurements of fundamental constants, freeing the International System of Units from its dependence on one-of-a-kind artifacts. Measurement units are now defined through these fundamental constants, like the speed of light and Planck’s constant.

                  Description: Quantum sensing uses quantum states to detect and measure physical properties with the highest precision allowed by quantum mechanics.

                  Expectation: Students will describe how quantum principles provide opportunities and set limits for sensing and measurement technologies, and identify how they can be applied in real world examples.

                  HS.Phys.9.1

                  Learning Outcome:
                  Students will describe how quantization (such as the discretization of energy levels) has been used to develop many sensing and measurement technologies used today.

                  Examples:

                  1. Materials contain spin-½ particles, such as electrons, that respond to electromagnetic fields. The response changes depending on the material (e.g., types of human tissue), and is used in nuclear magnetic resonance (NMR) and magnetic resonance imaging (MRI) technologies.
                  2. Lasers are used in many sensing, measurement, and computing technologies. Lasers generate coherent light, which is amplified by stimulating the emission of photons from the quantum energy states within material/substance.
                  3. The precise transitions of electrons between energy levels in an atom can be harnessed as time-keeping devices
                    called atomic clocks.
                  4. The quantum energy structure of semiconductors can be used to build light sensors that are able to detect single photons.

                  Standards Alignment (NGSS):

                  • HS-PS2-6 – Communicate scientific and technical information about why the molecular-level structure is important in the functioning of designed materials.
                  • HS-PS4-4 – Evaluate the validity and reliability of claims in published materials of the effects that different frequencies of electromagnetic radiation have when absorbed by matter.
                  • HS-PS4-5 – Communicate technical information about how some technological devices use the principles of wave behavior and wave interactions with matter to transmit and capture information and energy.
                  • HS-ETS1-2 – Design a solution to a complex real-world problem by breaking it down into smaller, more manageable problems that can be solved through engineering.
                  • HS-ETS1-3 – Evaluate a solution to a complex real-world problem based on prioritized criteria and trade-offs that account for a range of constraints, including cost, safety, reliability, and aesthetics, as well as possible social, cultural, and environmental impacts.
                  • MS-ETS1-1 – Define the criteria and constraints of a design problem with sufficient precision to ensure a successful solution, taking into account relevant scientific principles and potential impacts on people and the natural environment that may limit possible solutions.
                  • MS-ETS1-2 – Evaluate competing design solutions using a systematic process to determine how well they meet the criteria and constraints of the problem.
                  • MS-ETS1-3 – Analyze data from tests to determine similarities and differences among several design solutions to identify the best characteristics of each that can be combined into a new solution to better meet the criteria for success. 
                  HS.Phys.9.2

                  Learning Outcome:
                  Students will explain how quantum sensors use interference between quantum states to measure the properties of objects with which they interact.

                  Examples:

                  1. Interferometers, such as the Mach-Zehnder Interferometer, form a superposition of a photon’s quantum state over multiple paths, one of which goes through an object. By recombining those paths and observing the interference, they can be used to measure properties of the object very sensitively, such as its thickness or index of refraction. Very large interferometers are used in the Laser Interferometer Gravitational-Wave Observatory (LIGO) to measure gravitational waves.
                  2. Interferometers built with atoms instead of light can very sensitively measure acceleration, owing to their small effective (de Broglie) wavelengths. This quantum effect can be used in gravimeters for navigation and subsurface exploration.
                  3. Superconducting quantum interference devices (SQUIDs) use interference between different quantum states in a superconducting loop to sensitively measure magnetic fields, such as to measure brain activity in electroencephalogram (EEG) machines. SQUIDs also find use in quantum information devices.

                  Standards Alignment (NGSS):

                  • MS-PS2-3 – Ask questions about data to determine the factors that affect the strength of electric and magnetic forces.
                  • HS-PS4-3 – Evaluate the claims, evidence, and reasoning behind the idea that electromagnetic radiation can be described either by a wave model or a particle model, and that for some situations one model is more useful than the other.
                  • HS-PS4-4 – Evaluate the validity and reliability of claims in published materials of the effects that different frequencies of electromagnetic radiation have when absorbed by matter.
                  • HS-PS4-5 – Communicate technical information about how some technological devices use the principles of wave behavior and wave interactions with matter to transmit and capture information and energy.
                  • HS-ETS1-2 – Design a solution to a complex real-world problem by breaking it down into smaller, more manageable problems that can be solved through engineering.
                  • HS-ETS1-3 – Evaluate a solution to a complex real-world problem based on prioritized criteria and trade-offs that account for a range of constraints, including cost, safety, reliability, and aesthetics, as well as possible social, cultural, and environmental impacts.
                  • MS-ETS1-1 – Define the criteria and constraints of a design problem with sufficient precision to ensure a successful solution, taking into account relevant scientific principles and potential impacts on people and the natural environment that may limit possible solutions.
                  • MS-ETS1-2 – Evaluate competing design solutions using a systematic process to determine how well they meet the criteria and constraints of the problem.
                  • MS-ETS1-3 – Analyze data from tests to determine similarities and differences among several design solutions to identify the best characteristics of each that can be combined into a new solution to better meet the criteria for success.
                  HS.Phys.9.3

                  Learning Outcome:
                  Students will apply the Heisenberg Uncertainty Principle to explain tradeoffs between how precisely we can predict the measurement results of two incompatible properties, such as position and momentum.

                  Examples:

                  1. The Heisenberg Uncertainty Principle can be depicted geometrically as a rectangle of constant area with each side length representing the uncertainty in one incompatible property. To keep the area constant, decreasing the length of one side must result in the other side increasing in length.
                  2. Electron beam microscopes use high-speed electrons with a large uncertainty in momentum, which allows for more precise positioning than is possible with visible light.
                  3. High-precision atomic clocks require very precisely defined frequencies. With a precisely known frequency, a second can be defined in relation to the electromagnetic wave frequency that causes the atom’s electrons to transition between energy states. A precise frequency means that each electron transition has a very precisely defined energy, and due to the energy-time uncertainty relationship, there is a large uncertainty in when each electron will decay because the atomic lifetime of the transition is very long. This is because timing is defined with respect to a frequency (in this case, the frequency of the resonant EM field), which implies the timing of the electron decay itself has a large quantum uncertainty.
                  4. Squeezed states are engineered to have a high uncertainty in one property (for example, position), allowing improved precision when measuring the other (for example, momentum). Squeezed states of light can be used to reduce noise in interferometers, including the Laser Interferometer Gravitational-Wave Observatory (LIGO).

                  Standards Alignment (NGSS):

                  • HS-PS4-3 – Evaluate the claims, evidence, and reasoning behind the idea that electromagnetic radiation can be described either by a wave model or a particle model, and that for some situations one model is more useful than the other.
                  • MS-ETS1-1 – Define the criteria and constraints of a design problem with sufficient precision to ensure a successful solution, taking into account relevant scientific principles and potential impacts on people and the natural environment that may limit possible solutions.
                  HS.Phys.9.4AP1

                  Learning Outcome:
                  Honors/AP Extension: Students will use the mathematical representation of the Heisenberg Uncertainty Principle as ΔxΔp ≥ ℏ/2 to make predictions or to explain experimental results.

                  Examples:

                  1. The Heisenberg Uncertainty Principle can be used to predict the spreading of a photon’s quantum state after passing through a narrow slit, and simulated in class with laser pointers.
                  2. As your knowledge about the position becomes more precise (Δx decreases), the momentum distribution becomes less certain (Δp increases), such that their product is greater than or equal to ℏ/2.

                  Standards Alignment (NGSS):

                  • HS-PS4-3 – Evaluate the claims, evidence, and reasoning behind the idea that electromagnetic radiation can be described either by a wave model or a particle model, and that for some situations one model is more useful than the other.
                  • MS-ETS1-1 – Define the criteria and constraints of a design problem with sufficient precision to ensure a successful solution, taking into account relevant scientific principles and potential impacts on people and the natural environment that may limit possible solutions.
                  HS.Phys.9.5

                  Learning Outcome:
                  Students will describe how quantum measurements can be used to define fundamental constants and units.

                  Examples:

                  1. One second is currently defined as the time that elapses during 9,192,631,770 transitions in a Cesium-133 atomic clock.
                  2. One meter is defined as the amount of distance that light travels in vacuum during 9,192,631,770 transitions in a Cesium-133 atomic clock.
                  3. One kilogram is defined relative to Planck’s constant, a defined fundamental constant with units of kg*m²/s. Since the meter is defined relative to the speed of light and the second is defined relative to Cesium-133 atomic clocks, a unit of mass such as the kilogram can be defined relative to Planck’s constant, the speed of light, and the transition time of the Cesium-133 atomic clock.

                  Standards Alignment (NGSS):

                  • HS-ETS1-1 – Analyze a major global challenge to specify qualitative and quantitative criteria and constraints for solutions that account for societal needs and wants.
                  • HS-ETS1-2 – Design a solution to a complex real-world problem by breaking it down into smaller, more manageable problems that can be solved through engineering.
                  • HS-ETS1-3 – Evaluate a solution to a complex real-world problem based on prioritized criteria and trade-offs that account for a range of constraints, including cost, safety, reliability, and aesthetics, as well as possible social, cultural, and environmental impacts.
                  • MS-ETS1-1 – Define the criteria and constraints of a design problem with sufficient precision to ensure a successful solution, taking into account relevant scientific principles and potential impacts on people and the natural environment that may limit possible solutions.
                  • MS-ETS1-2 – Evaluate competing design solutions using a systematic process to determine how well they meet the criteria and constraints of the problem.
                  • MS-ETS1-3 – Analyze data from tests to determine similarities and differences among several design solutions to identify the best characteristics of each that can be combined into a new solution to better meet the criteria for success.

                  Members of Physics + QISE Framework Group

                  The focus group brought together a range of experts, including educators familiar with both teaching and research of physics concepts at high school and/or university levels. The members were:
                  • Paul Bianchi, Horace Greeley High School, Chappaqua, NY
                  • Kenric Davies, Liberty High School, Frisco, TX
                  • *John Donohue, Institute for Quantum Computing, Waterloo, Ontario
                  • *Emily Edwards, University of Illinois Urbana-Champaign, Urbana, IL
                  • Paul Feffer, Storm King School, Cornwall-on-Hudson, NY
                  • Alice Flarend, Bellwood-Antis High School, Bellwood, PA
                  • Zhanna Glazenburg, Croton-Harmon High School, Croton-on-Hudson, NY
                  • *Mark Hannum, American Association of Physics Teachers, College Park, MD
                  • Steven Henning, AAPT PTRA Program
                  • Kevin Lavigne, Hanover High School, Hanover, NH
                  • Jan Mader,  American Association of Physics Teachers, College Park, MD
                  • *Karen Jo Matsler, UT Arlington, Arlington, TX
                  • Maajida Murdock, Baltimore County Public Schools, Baltimore, MD
                  • Anastasia Perry, Illinois Math and Science Academy, Aurora, IL
                  • *Chandralekha Singh, University of Pittsburgh, Pittsburgh, PA
                  • Derrick Tucker
                  • *Tom Wong, Creighton University, Omaha, NE
                  • *Brent Yen, University of Chicago, Chicago, IL
                  *Designates working group leads, conveners, and/or framework editors.